Arms, Cartridges & Phono

Proper 6N-copper lead wires at a friendly price — the easy first turntable upgrade.

Oyaide's PA-2075 V2 phono cable with 102SSC conductors, in DIN to RCA or RCA to RCA. XLR on special request.

Grandio-series conductors for the most fragile link in your turntable's signal path.

Shupreme-grade lead wires: the last four centimetres, done properly.

Adopts pure silver plated Alpha OCC conductor for the lead wire conductor. Achieves sound quality with outstanding transparency and three-dimensionality.

Achieves sound quality with outstanding transparency and three-dimensionality.

Performance silver plated OFC tonearm cable.

Performance silver plated OFC tonearm cable, right-angle DIN to RCA.

Zonotone's 6NTW-6060meister tonearm cable, heavily shielded to keep ultra-low cartridge signals noise-free. RCA or DIN.

Phasemation's CC-1200, a balanced phono cable that carries the cartridge's minute signal without loss. RCA, XLR or DIN.

High-quality signal transmission enables reproduction of a delicate and rich sound field and powerful, clear sound.

A dedicated Grandio-grade earth lead — the cheapest lower noise floor you'll buy.

SAEC's super reference phono cable in PC-Triple C, triple-shielded and available in DIN, RCA and XLR combinations.

Zonotone's Shupreme TW-1 phono cable, an 8NCu hybrid with rhodium connectors. RCA, XLR or straight DIN.

High performance silver plated OCC tonearm cable.

High performance silver plated OCC tonearm cable.

Equipped with a non-magnetic rhodium-plated plug on a high-quality conductor α-conductor (pure silver coding α-OCC).

DIN/RCA model for tone arm output of the phono cable "Origin T NCF" that uses Furutech's copper-silver alloy α-conductor.

RCA/RCA model of phono cable "Origin T NCF" that uses Furutech's copper-silver alloy α-conductor.

Pure silver phono tonearm cable.

Pure silver phono tonearm cable.

Reference silver hybrid OCC phono tonearm cable, XLR version.

Reference silver hybrid OCC phono tonearm cable.

Anti-static LP inner sleeves that bleed off the charge your records pick up every time they're handled.

Antistatic sheets that sit in the disc case: passive static control for the CDs and Blu-rays you actually play.

Antistatic soft sleeves for CDs, DVDs and Blu-rays: keep the disc, lose the static and the dust it attracts.

A gold-plated RCA cap that silences unused inputs — and can take an earth lead.

SAEC's acrylic alignment gauge for the WE-709 and WE-712. A simple tool that takes the guesswork out of arm height.

Antistatic brush ideal for use on vinyl and optical media.

Antistatic brush with built-in ionizer for use on vinyl and optical media.

High performance static charge remover for vinyl, CDs and cables.

SAEC's 1978 solid mat reborn in precision-machined Alhais aluminium. Drop it on your platter in place of rubber or felt.

High-performance vibration damping sheet using the Piezo effect + hybrid structure of stainless steel and carbon provides outstanding sound quality with transparency and three-dimensionality without muddiness or distortion.

SAEC's SHS-5 machined aluminium headshell, a rigid, resonance-free home for your cartridge, with PC-Triple C leads.

A machined aluminium headshell that lets the cartridge, and nothing else, be heard.

SAEC's 50th anniversary MC cartridge, the first in the world with PC-Triple C coils and a ring magnet generator.

SAEC's new-generation double knife edge tonearm with PC-Triple C wiring and the SHS-5 headshell in the box.

The 12 inch WE-712, SAEC's long-geometry knife edge arm for lower tracking error across the whole record.

SAEC's double knife edge tonearm with static balance, PC-Triple C wiring and a duralumin headshell included.